############################################################# # # # Configuration file for Dire Wolf # # # # Linux version # # # ############################################################# # # Consult the User Guide for more details on configuration options. # # # These are the most likely settings you might change: # # (1) MYCALL - call sign and SSID for your station. # # Look for lines starting with MYCALL and # change NOCALL to your own. # # (2) PBEACON - enable position beaconing. # # Look for lines starting with PBEACON and # modify for your call, location, etc. # # (3) DIGIPEATER - configure digipeating rules. # # Look for lines starting with DIGIPEATER. # Most people will probably use the given example. # Just remove the "#" from the start of the line # to enable it. # # (4) IGSERVER, IGLOGIN - IGate server and login # # Configure an IGate client to relay messages between # radio and internet servers. # # # The default location is "direwolf.conf" in the current working directory. # On Linux, the user's home directory will also be searched. # An alternate configuration file location can be specified with the "-c" command line option. # # As you probably guessed by now, # indicates a comment line. # # Remove the # at the beginning of a line if you want to use a sample # configuration that is currently commented out. # # Commands are a keyword followed by parameters. # # Command key words are case insensitive. i.e. upper and lower case are equivalent. # # Command parameters are generally case sensitive. i.e. upper and lower case are different. # ############################################################# # # # FIRST AUDIO DEVICE PROPERTIES # # (Channel 0 + 1 if in stereo) # # # ############################################################# # # Many people will simply use the default sound device. # Some might want to use an alternative device by chosing it here. # # Linux ALSA is complicated. See User Guide for discussion. # To use something other than the default, generally use plughw # and a card number reported by "arecord -l" command. Examples: # ADEVICE plughw:CARD=Device,DEV=0 # ADEVICE plughw:1,0 ADEVICE plughw:CARD=CODEC,DEV=0 # Starting with version 1.0, you can also use "-" or "stdin" to # pipe stdout from some other application such as a software defined # radio. You can also specify "UDP:" and an optional port for input. # Something different must be specified for output. # ADEVICE - plughw:1,0 # ADEVICE UDP:7355 default # # Normally you will want to use the default sample rate of 44100 per second. # Change this to 22050 or 11025 only if your computer can't keep up. # A lower rate means lower CPU demands but performance will be degraded. # ARATE 44100 # # Number of audio channels for this souncard: 1 or 2. # ACHANNELS 1 #ACHANNELS 2 ############################################################# # # # SECOND AUDIO DEVICE PROPERTIES # # (Channel 2 + 3 if in stereo) # # # ############################################################# #ADEVICE1 ... ############################################################# # # # THIRD AUDIO DEVICE PROPERTIES # # (Channel 4 + 5 if in stereo) # # # ############################################################# #ADEVICE2 ... ############################################################# # # # CHANNEL 0 PROPERTIES # # # ############################################################# CHANNEL 0 # # The following MYCALL, MODEM, PTT, etc. configuration items # apply to the most recent CHANNEL. # # # Station identifier for this channel. # Multiple channels can have the same or different names. # # It can be up to 6 letters and digits with an optional ssid. # The APRS specification requires that it be upper case. # # Example (don't use this unless you are me): MYCALL WB2OSZ-5 # #MYCALL N0CALL MYCALL KI6ZHD-3 # # VHF FM operation normally uses 1200 baud data with AFSK tones of 1200 and 2200 Hz. # This is the default is you don't specify MODEM. # #MODEM 1200 1200 2200 # # 200 Hz shift is normally used for 300 baud HF SSB operation. # # Note that if you change the tones here, you will need to adjust # your tuning dial accordingly to get the same transmitted frequencies. # # In the second example, we have 7 demodulators spaced 30 Hz apart # to capture signals that are off frequency. # If you run out of CPU power, drop the audio sample rate (ARATE) down to 22050. #MODEM 300 1600 1800 MODEM 300 1600 1800 7 30 #MODEM 300 1600 1800 7 30 # # 9600 baud doesn't use AFSK so no tones are listed. # #MODEM 9600 # # Uncomment line below to enable the DTMF decoder for this channel. # #DTMF # # If not using a VOX circuit, the transmitter Push to Talk (PTT) # control is usually wired to a serial port with a suitable interface circuit. # DON'T connect it directly! # # For the PTT command, specify the device and either RTS or DTR. # RTS or DTR may be preceded by "-" to invert the signal. # Both can be used for interfaces that want them driven with opposite polarity. # # COM1 can be used instead of /dev/ttyS0, COM2 for /dev/ttyS1, and so on. # #PTT COM1 RTS #PTT COM1 RTS -DTR #PTT /dev/ttyUSB0 RTS # #not legal but at least it lets us listen #PTT /dev/USI_PTT +RTS PTT /dev/USI_PTT RTS -DTR # # On Linux, you can also use general purpose I/O pins if # your system is configured for user access to them. # This would apply mostly to microprocessor boards, not a regular PC. # See separate Raspberry Pi document for more details. # The number may be preceded by "-" to invert the signal. # #PTT GPIO 25 ## from 1.1B ------------------------------------------------------- # ## After turning on transmitter, send "flag" characters for ## TXDELAY * 10 milliseconds for transmitter to stabilize before ## sending data. 300 milliseconds is a good default. ## # TXDELAY 40 ## from 1.1B ------------------------------------------------------- ## ## Keep transmitting for TXTAIL * 10 milliseconds after sending ## the data. This is needed to avoid dropping PTT too soon and ## chopping of the end of the data because we don't have ## precise control of when the sound will actually get out. ## # TXTAIL 10 # ############################################################# # # # CHANNEL 1 PROPERTIES # # # ############################################################# #CHANNEL 1 # # Specify MYCALL, MODEM, PTT, etc. configuration items for # CHANNEL 1. Repeat for any other channels. ############################################################# # # # TEXT TO SPEECH COMMAND FILE # # # ############################################################# #SPEECH dwespeak.sh ############################################################# # # # VIRTUAL TNC SERVER PROPERTIES # # # ############################################################# # # Dire Wolf acts as a virtual TNC and can communicate with # client applications by different protocols: # # - the "AGW TCPIP Socket Interface" - default port 8000 # - KISS protocol over TCP socket - default port 8001 # - KISS TNC via pseudo terminal (-p command line option) # #Setting to 0 disables #AGWPORT 8000 AGWPORT 0 #KISSPORT 8001 KISSPORT 0 # # It is sometimes possible to recover frames with a bad FCS. # This applies to all channels. # # 0 [NONE] - Don't try to repair. # 1 [SINGLE] - Attempt to fix single bit error. (default) # 2 [DOUBLE] - Also attempt to fix two adjacent bits. # ... see User Guide for more values and in-depth discussion. # FIX_BITS 2 # ############################################################# # # # BEACONING PROPERTIES # # # ############################################################# # # Beaconing is configured with these two commands: # # PBEACON - for a position report (usually yourself) # OBEACON - for an object report (usually some other entity) # # Each has a series of keywords and values for options. # See User Guide for details. # # Example: # # This results in a broadcast once every 10 minutes. # Every half hour, it can travel via two digipeater hops. # The others are kept local. # #PBEACON delay=1 every=30 overlay=S symbol="digi" lat=42^37.14N long=071^20.83W power=50 height=20 gain=4 comment="Chelmsford MA" via=WIDE1-1,WIDE2-1 #PBEACON delay=11 every=30 overlay=S symbol="digi" lat=42^37.14N long=071^20.83W power=50 height=20 gain=4 comment="Chelmsford MA" #PBEACON delay=21 every=30 overlay=S symbol="digi" lat=42^37.14N long=071^20.83W power=50 height=20 gain=4 comment="Chelmsford MA" # With UTM coordinates instead of latitude and longitude. #PBEACON delay=1 every=10 overlay=S symbol="digi" zone=19T easting=306130 northing=4726010 # # When the destination field is set to "SPEECH" the information part is # converted to speech rather than transmitted as a data frame. # #CBEACON dest="SPEECH" info="Club meeting tonight at 7 pm." # # Modify for your particular situation before removing # the # comment character from the beginning of appropriate lines above. # ############################################################# # # # DIGIPEATER PROPERTIES # # # ############################################################# # # For most common situations, use something like this by removing # the "#" from the beginning of the line below. # #DIGIPEAT 0 0 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE # See User Guide for more explanation of what this means and how # it can be customized for your particular needs. ############################################################# # # # INTERNET GATEWAY # # # ############################################################# # First you need to specify the name of a Tier 2 server. # The current preferred way is to use one of these regional rotate addresses: # noam.aprs2.net - for North America # soam.aprs2.net - for South America # euro.aprs2.net - for Europe and Africa # asia.aprs2.net - for Asia # aunz.aprs2.net - for Oceania #IGSERVER noam.aprs2.net # You also need to specify your login name and passcode. # Contact the author if you can't figure out how to generate the passcode. #IGLOGIN WB2OSZ-5 123456 # That's all you need for a receive only IGate which relays # messages from the local radio channel to the global servers. # Some might want to send an IGate client position directly to a server # without sending it over the air and relying on someone else to # forward it to an IGate server. This is done by using sendto=IG rather # than a radio channel number. Overlay R for receive only, T for two way. #PBEACON sendto=IG delay=0:30 every=60:00 symbol="igate" overlay=R lat=42^37.14N long=071^20.83W #PBEACON sendto=IG delay=0:30 every=60:00 symbol="igate" overlay=T lat=42^37.14N long=071^20.83W # To relay messages from the Internet to radio, you need to add # one more option with the transmit channel number and a VIA path. #IGTXVIA 0 WIDE1-1 # You might want to apply a filter for what packets will be obtained from the server. # Read about filters here: http://www.aprs2.net/wiki/pmwiki.php/Main/FilterGuide # Example: #IGFILTER m/50 # Finally, we don't want to flood the radio channel. # The IGate function will limit the number of packets transmitted # during 1 minute and 5 minute intervals. If a limit would # be exceeded, the packet is dropped and message is displayed in red. IGTXLIMIT 6 10 ############################################################# # # # APRStt GATEWAY # # # ############################################################# # # Dire Wolf can receive DTMF (commonly known as Touch Tone) # messages and convert them to packet objects. # # See separate "APRStt-Implementation-Notes" document for details. # # # Sample gateway configuration based on: # # http://www.aprs.org/aprstt/aprstt-coding24.txt # http://www.aprs.org/aprs-jamboree-2013.html # # Define specific points. TTPOINT B01 37^55.37N 81^7.86W TTPOINT B7495088 42.605237 -71.34456 TTPOINT B934 42.605237 -71.34456 TTPOINT B901 42.661279 -71.364452 TTPOINT B902 42.660411 -71.364419 TTPOINT B903 42.659046 -71.364452 TTPOINT B904 42.657578 -71.364602 # For location at given bearing and distance from starting point. TTVECTOR B5bbbddd 37^55.37N 81^7.86W 0.01 mi # For location specified by x, y coordinates. TTGRID Byyyxxx 37^50.00N 81^00.00W 37^59.99N 81^09.99W # UTM location for Lowell-Dracut-Tyngsborough State Forest. TTUTM B6xxxyyy 19T 10 300000 4720000 # Location for the corral. TTCORRAL 37^55.50N 81^7.00W 0^0.02N # Compact messages - Fixed locations xx and object yyy where # Object numbers 100 - 199 = bicycle # Object numbers 200 - 299 = fire truck # Others = dog TTMACRO xx1yy B9xx*AB166*AA2B4C5B3B0A1yy TTMACRO xx2yy B9xx*AB170*AA3C4C7C3B0A2yy TTMACRO xxyyy B9xx*AB180*AA3A6C4A0Ayyy TTMACRO z Cz # Receive on channel 0, Transmit object reports on channel 1 with optional via path. # Advertise gateway position with beacon. # OBEACON DELAY=0:15 EVERY=10:00 VIA=WIDE1-1 OBJNAME=WB2OSZ-tt SYMBOL=APRStt LAT=42^37.14N LONG=71^20.83W COMMENT="APRStt Gateway"